Just to post a quick update, after the “great cleanse” I moved back to using hydroguard in addition to soil amendments which are basically same ingredients as Recharge, thanks @Osage for the idea to try that. I would’ve bought Recharge but after checking label I realized I have stronger equivalents from my other grows already. Also doing my own mixing/pH when filling (using combo of Ph Perfect 3-part set, with Amor Si and using bottle #5 for CalMag). Mixing the nutrients (more thoroughly than the bubbles alone do) seems to make a fairly major difference in of itself.
I also introduced a little cooling fan into the reservoir which has helped to keep the water temp in check (I only needed about a 1-2 degree buffer, it provides about 3-4 degrees). I don’t recommend anyone else try that without understanding what can happen and how to mitigate.
Here’s a pic before “hairstyling” a few days ago:
Here’s a pic after tucking a bunch of branches into the middle, with more bud sites exposed:
I have to do that every 2 days, she unfolds back to praying leaves every morning:
The reason I’m tucking instead of snipping is because I believe that to be the error I made with my other auto in the grobo (which also experienced root trauma early on) – so for this one I’m trying to minimize any additional trauma. It looks healthier than the ones I’ve grown in soil at this point (great color/shine/etc) so I’m inclined to continue tucking instead of snipping until the end of the grow to try to get the most out of this little gal. Have explored into the center, no pests or PM or anything - the fan is blowing right onto the bush so that’s likely why that’s the case given I haven’t relaxed the humidity much yet.
This one was also topped, whereas this strain grown in soil I only FIM’d. There are about 2x as many bud sites on this one! If the soil grow serves as a measure this looks like it’ll yield about 1/2oz if she makes it the whole way. The quality should be good, though, Canuk genetics haven’t let me down yet in that regard.
Here’s a clearer pic of the bud sites (the white parts stand out better under this light):
Oh yeah - that’s Day 70 - Flowering (Day 15 /32)
I did extend veg a little bit while fixing the root (rot) issue and will probably extend flower by 1 wk if she needs it.
I don’t know much about autos, does extending help or hurt an auto because it switches stages automatically?
It doesn’t do much to prevent flowering, no - she actually started flowering during the veg phase.
The stress did stunt and slow things down a bit, so I figured to leave veg mode on for a bit longer to let her recover a bit more first.
Here’s what she looked like in the past.
Nearly two months ago, she was “in the ER” for a day while the grobo was re-sanitized. At this point I switched from using biologicals (like hydroguard) to using sterile additives to keep the slime at bay while determining my next course of action:
Nearly a week later, this was the day I cut off the bottom-most set of leaves (they were starting to go grey):
A couple weeks after that, still seeing really poor root development and inward curling on leaves:
A week later she started to bush up a bit better and leaves were starting to uncurl:
About a week later the problems started to re-surface, the leaves are droopy and the “brown rust-colored skin” was taking more leaf by the day:
The roots were looking better, though, which was why I cut back on the sterilizing agent:
The next day the situation got a bit worse, all of the leaves were drooping and starting to curl in again:
So she went back to the ER to sit in a bath of hydrogen peroxide (250 mL @ 3%) mixed with water (650 mL) for about 1.5 hours:
Pics of the roots a couple days later, still nothing to write home about. Those bubbles are the result of 2 added air stones powered by 2 separate pumps on top of the grobo’s default air stone, so even if a pump dies there’s still 2 air stones running - there’s definitely enough aeration:
Half a week later, she’s showing signs of improvement - there is some reach occurring:
I concocted a blend of 50 mL hydroguard + 1/4 tbsp great white + 1/4 tbsp root rescue (basically hydroguard + something “recharge”-like) in 1.2L of water and put it in a separate container to bubble for about 12-14 hours. I also mixed about 2-3 drops (about 2/13th of a mL) of molasses in the container. I added half of this mixture to each reservoir and poured some of it through the coco pod (slowly/carefully) to make sure it saturated that part of the root zone as well.
This is also when Armor Si was introduced to the res water.
I’ll be using both of these continually after seeing the results.
A week after that:
And here she is this morning just waking up:
Also, a word of caution to anyone planning to use silica (like Armor Si):
It will drastically raise the pH and quickly cause a drain of your #2 bottle if you simply dump the requisite mL into the reservoir and allow grobo to automatically adjust the pH.
My experience has led me to believe that it’s a must to 1) mix the water thoroughly after adding it, and 2) make sure to pH the water yourself before filling with it.
My suspicion is that until the bubbles mixed it enough there were highly concentrated amounts reaching the pH sensor and throwing off the readings, enough so it felt it needed to dump about 90% of my #2 bottle in over a 12 hour period. For comparison, it only takes about 20mL of pH down when doing it manually and mixing it well.
This might be happening to me. My #2 bottle is nearly empty, 1 month into grow. I add recharge, and hydroguard, right after my refill every week.
I got a couple of 12L buckets cheap from the dollar store, one labeled D for dirty and the other C for clean. They’ve been working out better than just filling straight from the distilled water bottles.
The dirty bucket is for draining, and the clean bucket is for mixing and then filling.
I’ve been mixing in this order:
The concoction is a really dark brown (looks black) color. When the water goes in the res it looks fairly dark/black, but coming out a week later it is very clear.
From the powder compounds added there is a considerable amount of sediment left on the bottom but it’s mostly just the filler material that they suspend the bacteria/fungi on/in. I’ve found that when cleaning out the res after a grow what works well is to stir the res water a bunch while it’s draining and “kick up the dust” to let the pump do the work - there’s less left on the floor of the reservoir (less left to wipe out) afterward if enough of it gets sucked out.
Since I started mixing mid-grow those values are what were used through end of veg to flower/present.
For soil, usually start nutes around 1/4 or even less than those current values and then gradually increase as it grows, which is what I’ll try when starting my next grobo grow.
You should add those to the water in a bucket first then ph, THEN fill. You will avoid the ph swings and use less of bottles 1*2:+1:
Here’s today, flowering like crazy everywhere she can:
Used some latex wire to stretch her out a bit and let more light in:
Some more pics:
Was away for 4 days, came home to this:
Smells really good too!
Am thinking about defoliation but really don’t want to shock it, and the buds down below don’t appear to be stunted - there is a bit of light bleeding through to the lower leaves (it’s not entirely as dark as it seems in pic).
Edit: did some tucking
Looks like about 3 weeks max until flush, if the timing is similar to past grows.
Here’s another similar-sized of same strain around the same point in flowering:
That one at harvest:
Which landed at 8g when dried and was quite potent for its size:
If things stay on track my guess is this current grow is about 4-5x bigger than the one that was harvested, which is very promising! There are a lot more (and longer) trichomes as well.
Looks good enough to eat as a salad!
Flowering (Day 29 /39)
That bush was just becoming too much to tuck in. The last two times it was tucked there was a single leaf noticeably sweating a bit (touching another) and it’s been harder to keep RH down:
So, I decided to do one last defoliation:
Haven’t seen the base of stem so clearly in a long time:
The buds stand out better under the purple light:
This is nearly 24 hours later, might be too early to tell but she doesn’t seem to be too upset:
DAY 98: Flowering (Day 43 /46)
The buds up front are stacking fairly well (for their size) and there’s still some new ones developing in the corner. Going to start flushing today.
Started this same strain in the other unit a few weeks ago, will start a thread for that soon.
Still looks airy and green/white! Is that normal for this strain? What are your trichomes saying? Not seeing any frost either. I am however envious of all those bud sites! Great job on that!
It’s a bit airy, yes - but also “mini”, most of the canopy is halfway between the two fans. She went through a lot of stress so I’m mostly just happy she’s made it this far.
Trichomes are mostly cloudy and some turning amber on the front, that back corner where she’s stretched a bit further (the greenest area) is still turning cloudy. Will add pics later they look really good.
Am expecting to keep it in flush for another 14-21 days.
Here’s the trichomes:
They’re a bit out of focus, but there is a small number of amber ones visible in the middle shots. There aren’t many of them yet.
Very interesting! Im excited to see the final density!